WARNING! ADDING AN LCP-BP WILL REMOVE MODULES FROM THIS RAIL
LCP-MTP IS NOT REQUIRED WITH SELECTED MODULES
LEFT-HAND MODULE CANNOT BE EMPTY WITH LCP-MTP
ADD TO RAIL
SHALLOW MODULE WARNING
THE CHOSEN MODULE IS SHALLOW & RESTRICTS WHAT YOU CAN PLACE IN THE POSITION NEXT TO IT
ENCLOSURE FINISH LEVEL
ENCLOSURE ONLY Basic enclosure with DIN rail and trunking - modules are for illustrative purposes only.
ENCLOSURE + RCBOS Enclosure supplied with terminal blocks and breakers installed.
SITE READY - CUSTOMER SUPPLIED Enclosure supplied with modules fitted, fully wired terminal blocks and RCBO breakers installed. Modules and wiring are functionality tested where possible.
SITE READY - GHOST WIRED Enclosure supplied with sacrificial terminal blocks wired in place of modules, plus terminal blocks and breakers installed.
SHALLOW MODULES
Most Lutron modules are DIN mounted and protrude through the opening in the enclosure lid, ensuring compliance with regulations.
However some modules (marked as shallow) are not tall enough and not designed to protrude through the lid, therefore a blanking plate (LCP-BP)
or Trim plate (LCP-MTP) is recommended to maintain compliance with regulations.
If a shallow module is installed on the left-hand side of the rail, it limits what can be installed on the right-hand side.
If a rail is to have a single shallow module, it must be installed in the right-hand position.
BLANKING PLATE RECOMMENDED
As with shallow modules above, if a rail has no modules installed it should be covered with a blanking plate (LCP-BP).
TRIM PLATE RECOMMENDED
If smaller width modules are used on a rail, a module trim plate (LCP-MTP) should be used to cover the gaps in the lid.
LCP-MTP HELP
ENCLOSURE ONLY Basic enclosure with DIN rail and trunking - modules are for illustrative purposes only.
ENCLOSURE + RCBOS Enclosure supplied with terminal blocks and breakers installed.
SITE READY - CUSTOMER SUPPLIED Enclosure supplied with modules fitted, fully wired terminal blocks and RCBO breakers installed. Modules and wiring are functionality tested where possible.
SITE READY - GHOST WIRED Enclosure supplied with sacrificial terminal blocks wired in place of modules, plus terminal blocks and breakers installed.
BREAKER RAIL WARNING
WHEN LCP10 & 3 PHASE COMBINATION IS SPECIFIED, THERE IS REDUCED ROOM ON THE BOTTOM RAIL DUE TO A WIDER 4 POLE SWITCH. THIS MEANS THAT THERE IS ONLY ROOM FOR EITHER A PROCESSOR OR A POWER SUPPLY, NOT BOTH.